Free shipping on purchases of $99 or more.
Les détails ici
Maintenance
34.99$
* Durable, versatile double-faced shop hammer * Made of forged, precision-machined steel * Replaceable composite striking face * Fiberglass handle with rubber grip * Weight: 8 oz. (225g) head * Length: 12” (30.5cm)
149.99$
* 2–14 Newton meters (18–124 in/lb) * Adjustable in 0.4 Nm increments * 3/8'' ratchet * Easy to use for left- and right-handed users * Accuracy +/- 4% * Length: 19.5 cm (7 1/2'')
44.99$
* Wall mount specially designed for Park Tool molded-handle hex keys * Keys are positioned for easy access and easy reading of sizes
269.99$
* A 47 mm reamer for cutting the bottom of the head tube on frames using a 1-1/4" integrated headset with IS47 bearings* 45-degree bearing geometry* To be used with the HTR-1 or HTR-1B set, #690-XL or 750.2
79.99$
* Mounts directly to the DT-3 * Allows for increased accuracy * Extended cylindrical tip to avoid interference with rotors
39.99$
* Forgé d’acier Chrome Vanadium (CR-v), avec traitement thermique, placage et polissage de précision* L’outil PAW-6 s’ouvre jusqu’à 24mm et présente une échelle de mesure gravée au laser ainsi qu’une poignée bleue, trempée, pour accroitre le confort
119.99$
* Designed to allow Park Tool PRS-20, PRS-21 or PRS-23 repair stands to accept bikes with 12mm and 15mm thru-axles
54.99$
* Conçu pour les randonneurs l’ensemble économique WTK-2 contient les outils nécessaires pour les réparations de base et les ajustements à la maison ou sur la route* Inclus :démonte-pneu, outil hex/tournevis pliable AWS-9, rustines pré-engluées pièce de réparation de carcasse de pneu, le tout dans un étui pratique
79.99$
* The 750.2 adapter increases the centering cone size of the HTR-1 set* The 750 allows use of the HTR-1 with IS “integrated without cups”, “low stack with cups”, and EC 1.5" standards* The HTR-1 must have the correct cutter and pilot to match the standard
225.99$
* The #738 is used to ream head tubes for integrated 1-1/2" headsets* Use with the HTR-1 Head Tube Reaming and Facing Set (900131-01), 690-XL Facing Cutter (900730-02) and 750.2 Centering Cone Adapter (901576-01)
45.99$
* Allows you to quickly thread nipple nuts when building wheels * Dual-density handle and bronze bushing for smooth operation and increased service life * For profiled rims up to 50mm deep
34.99$
* Wrench for two-sided nuts * One side for slotted adjustable cones used on one-piece cranks, and the other for three-notch fixed cones used on one-piece cranks
14.99$
* Slim wrench with 5.5 mm and 3 mm openings * Fits the clutch tension adjustment device on Shimano XT, SLX, Deore, Saint, Zee Shadow+ rear derailleurs and earlier Shadow+ models
30.99$
* 10.25" long 4-arm star wrench for good leverage * Forged 15, 17 and 19 mm wrenches plus a 3/8" socket driver * Perfect for axle nuts, pegs, bottom bracket tool, etc.
121.99$
* Forged chrome-vanadium steel with chrome plating and polished finish * Vinyl center for better grip * Includes 12 wrenches from 6 mm to 17 mm
22.99$
* Collar 1707.2 is designed to allow pre-2012 PRS 20 and PRS 21 repair stands to accept the 106 work tray.
174.99$
* Le produit TS-TA permet d’adapter tous les supports de dressage de Park Tool de manière à pouvoir travailler avec les roues Thru Axle de 12 mm, 15 mm et 20 mm, ainsi que les roues Cannondale Lefty®.
21.99$
* Thin offset wrench with 10mm, 11mm, 12mm and 13mm openings suitable for many side-pull and dual-pivot brake models
45.59$
* 6'' needle-nose pliers with 5 crimping areas and a cutting blade * Forged, heat-treated chromoly steel with hidden spring * Ergonomic handles
19.99$
* 12" tungsten steel hacksaw * Cuts carbon handlebars, forks and seatposts * Compatible with the Park Tool SAW-1 and other 12" hacksaws
479.99$
* CRC-15 est utilisé avec l’outil de coupe de CRC-1 pour l’usinage de sièges de couronne de course de 39,8 mm (1,5 po) sur les fourches biseautées avec tubes pivots de 1 1/8 po* Comprend un adaptateur usiné et un outil de coupe de couronne de course en acier de...
119.99$
* Pour les roulements Press-Fit utilisés dans les BB-90, BB92, Shimano Press Fit, SRAM Press Fit GXP, Race Face Press Fit et autres systèmes Press Fit* Inclus 2 coussinets d’installation dans le cadre (à utiliser avec le HHP-2 ou HHP-3)* Inclus un extracteur de roulements
